spacer spacer spacer spacer
Kaydon Bearings spacer spacer

Contact Us

 
spacer
spacer

Kaydon Reali-Slim® stainless steel bearings

SG series
Type X – four point contact

A Conrad assembled bearing designed for applications involving multiple loads. Unique internal geometry permits application of radial load, thrust load in either direction, and moment load, individually or in any combination. A single four-point contact bearing may replace two bearings in many applications.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

 spacer

 
Log in to access Slewing Bearing 3D models & CAD files. Access Thin Section Bearings at SKF.com
 
Forgot password?  |  Register
Kaydon
part
number		 Dimensions in Inches Capacities1 Approx.
weight
(lbs)
Bore Outside
dia.		 Land
dia.
L1		 Land
dia.
L2		 Dynamic Static2
Radial
(lbs)		 Thrust
(lbs)		 Moment
(in-lbs)		 Radial
(lbs)		 Thrust
(lbs)		 Moment
(in-lbs)
SG040XP0 4.000 6.000 4.742 5.258 7,979 11,260 14,966 8,210 20,520 20,520 3.600
SG042XP0 4.250 6.250 4.992 5.508 7,917 11,260 15,592 8,210 20,520 21,550 3.800
SG045XP0 4.500 6.500 5.242 5.758 8,205 11,750 16,930 8,760 21,890 24,080 4.000
SG047XP0 4.750 6.750 5.492 6.008 8,487 12,230 18,306 9,300 23,260 26,740 4.100
SG050XP0 5.000 7.000 5.742 6.258 8,762 12,710 19,721 9,850 24,620 29,550 4.300
SG055XP0 5.500 7.500 6.242 6.758 8,979 13,180 21,896 10,400 25,990 33,790 4.700
SG060XP0 6.000 8.000 6.742 7.258 9,503 14,090 24,956 11,490 28,730 40,220 5.100
SG065XP0 6.500 8.500 7.242 7.758 9,713 14,530 27,327 12,040 30,100 45,140 5.400
SG070XP0 7.000 9.000 7.742 8.258 10,208 15,400 30,636 13,130 32,830 52,530 5.800
SG075XP0 7.500 9.500 8.242 8.758 10,410 15,820 33,196 13,680 34,200 58,140 6.100
SG080XP0 8.000 10.000 8.742 9.258 10,882 16,650 36,743 14,770 36,940 66,480 6.500
SG090XP0 9.000 11.000 9.742 10.258 11,526 17,870 43,240 16,420 41,040 82,080 7.200
SG100XP0 10.000 12.000 10.742 11.258 12,147 19,040 50,124 18,060 45,140 99,320 7.900
SG110XP0 11.000 13.000 11.742 12.258 12,739 20,180 57,347 19,700 49,250 118,200 8.600
SG120XP0 12.000 14.000 12.742 13.258 13,315 21,280 64,935 21,340 53,350 138,700 9.300
SG140XP0 14.000 16.000 14.742 15.258 14,404 23,410 81,056 24,620 61,560 184,700 10.800
SG160XP0 16.000 18.000 16.742 17.258 15,425 25,450 98,373 27,910 69,770 237,200 12.300
SG180XP0 18.000 20.000 18.742 19.258 16,386 27,410 116,793 31,190 77,980 296,300 13.700
SG200XP0 20.000 22.000 20.742 21.258 17,293 29,300 136,238 34,470 86,180 362,000 15.800
SG220XP0 22.000 24.000 22.742 23.258 18,152 31,130 156,625 37,760 94,390 434,200 17.300
SG250XP0 25.000 27.000 25.742 26.258 19,360 33,780 188,838 42,680 106,700 554,900 19.500
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in the Kaydon Reali-Slim® bearing catalog. Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.

 
Related pages
SG series, type A
SG series, type C
Thin section bearing selector
Reali-Slim® stainless steel bearings part number codes
Reali-Design® engineering software

Related downloads
Kaydon Reali-Slim® bearing catalog (Adobe PDF)

Adobe Acrobat Reader

 spacer spacer

Snap-over separator
1/2" balls

SG series, type X - four point contact, bearing profile

3F = 0.080
Bearing corners are
normally chamfered